Buying New or Used Construction Equipment in Bergen County NJ
With the fast pace changes in technology business owners may want to keep up with the latest versions of the products. Buying new equipment means you keep up with the changes in technology, it also means you are more productive and therefore more competitive. You will have the warranty of a new purchase, but as you have just made a huge purchase, your finances may have taken a hit. In the construction business this many not be a viable option. What can be done with the old machinery? You can try to sell it, but how quickly can you sell a piece of large machinery? As a business owner, you must assess your company’s needs to decide which is the better option for your business. You can buy new or you can consider buying used or refurbished construction equipment in Bergen County NJ. However, if you decide to buy used or refurbished, you should buy from a reputable company like National Lift Equipment.
Used or Refurbished Equipment in Bergen County NJ
Buying refurbished equipment may not be even considered by some, but for many small businesses it certainly is , for some, the only option. For one thing, it’s far less expensive than buying new. As the buyer you have to do your homework before you make this type of purchase. You must do your research and be sure to buy from a reputable used construction equipment company in Bergen County NJ. Note that usually, there is no warranty of used machinery. This is why you must do research and if possible you might want to hire a mechanic. But most importantly, buy from a reputable company like NLEQ. They have been in business for over 27 years, and proudly continue to serve communities like Haverford PA by providing construction and heavy equipment rentals such as Articulated Boom Lifts, Straight Boom Lifts, Scissor Lifts Telehandlers and more.
Find More Below on Used Construction Equipment in Bergen County NJ
Best 6000 lb telehandler
Once you have decided you need a 6,000 pound telehandler, you will have many options to choose from. The main three commonly purchased telehandlers are SkyTrak, JLG, and Genie. It is important that you examine the specifications of each machine before you make your decision. In order to get your money’s worth, you should make sure you purchase the machine that best meets your job’s needs. Make sure to examine the characteristics of each machine and compare them to your job.
The SkyTrak telehandler has a maximum lift height of 36 feet 1 inch and a maximum reach of 22 feet 4 inches. This machine has a drawbar pull of 22,000 pounds and a frame leveling of 10 degrees. The lift capacity at full height is 6000 pounds while the lift capacity at max reach is 1,800 pounds. The load center is 2 feet. The Skytrak shooting boom forklift has no outriggers or stabilizers. It has a turn radius of 13 feet 9 inches. The speed of maximum lift is 12 seconds, while the maximum lower speed is 9 seconds. The maximum telescope in and out speeds are both 14 seconds. The maximum travel speed is 19 miles per hour.
The JLG telehandler has a 6,000-pound maximum weight capacity has a drawbar pull of 18000 pounds. It has four forward gears and 3 reverse gears. The maximum forward speed is 19.5 miles per hour. The maximum lift capacity is 6,600 pounds. The maximum lift height is 42 feet. The maximum load capacity at maximum height is 6,000 pounds. The maximum forward reach is 29 feet and the maximum load at maximum reach is 1,000 pounds. This telescopic forklift has a boom speed when going up at 14 seconds and down speed at 10 seconds. The extend speed is 20 seconds and the retract speed is 8 seconds. This machine also runs on diesel fuel.
The Genie telehandler has a drawbar pull of 15,100 pounds. This machine has 3 forward gears and 3 reverse gears. The maximum forward speed is 18 miles per hour. The maximum lift capacity is 6000 pounds. The maximum lift height on this telescopic forklift is 36 feet and the maximum load at this maximum lift height is also 5000 pounds. The maximum forward reach is 21 feet and the maximum load at this maximum is 1,500 pounds. The 6,000-pound Genie telehandler has a boom up of 10 seconds and a boom down of 8 seconds. The boom extend is 11 seconds and the boom retract is 9 seconds. The machine has a turning radius of 13 feet 4 inches.
If you are interested in purchasing a 6,000 pound telehandler, use these characteristics to find the machine best fit for your job. Possibly the two most important specifications to consider when making this decision are the lift height and reach distance. If you try to reach higher and farther than your machine can safely manage, you run a large risk of toppling over or damaging the equipment. This is extremely dangerous and can result in fatal injury. If you need more help in making your decision, our experts here at NLEQ will be glad to assist.