Used Construction Equipment near Youngsville, PA

If you are in need of a productive scissor lift and want to save some money, you should take a look at a used Genie GS3268 RT scissor lift. The maximum platform occupancy for this used scissor lift is four people. The lift capacity is 1,000 pounds. The extension deck capacity is 300 pounds. The drive speed when the platform is stowed is 3.8 miles, while the drive speed with the platform raised is half of a mile. The GS3268 RT has a stowed gradeability of thirty percent.

The maximum outrigger leveling is 6.6 degrees’ front to back and 10.6 degrees’ side to side. The inside turning radius is five feet, and the outside turning radius is twelve feet and one inch. It takes forty seconds to raise the platform and thirty-seven seconds to lower the platform.

This scissor lift comes equipped with both proportional controls and four-wheel drive. This machine uses rough terrain tires of the size 12 x 23.5 inches. When it comes to the power source, the GS3268 RT has three options. The gas option is Kubota DF-752 gas/LPG 22 hp. The two diesel options are Kubota D-905 Diesel 20 hp and Perkins 403C-11 Diesel 26 hp.

The fuel tank capacity of this scissor lift is fifteen gallons. The hydraulic system capacity is 16.5 gallons. The total weight of this machine is 8,008 pounds.

More About Used Genie GS3268 RT Scissor Lift

The GS3268 RT has a maximum working height of thirty-eight feet. The platform height maximum is thirty-two feet. The platform height stowed is four feet 3.75 inches. The platform length outside is eight feet and three inches and extended is thirteen feet. The slide-out platform extension deck is five feet. The outside platform width is five feet and one inch. The toeboard height of a used Genie 3268 RT scissor lift is 6 inches.

The height of this machine stowed is eight feet five inches, and the length of the machine stowed is eight feet nine inches. The width is five feet eight inches. The wheelbase is six feet and one inch. The center ground clearance is 7.5 inches.

If you are interested in purchasing a scissor lift and do not need anything too large, this moderately sized scissor lift is likely a great choice for you. To discern whether or not this is a good choice for you, take a look at the specifications and compare them to the job you will have to do. Paying key attention to the lift height and weight capacity is vital in this process, as these are two of the most important parts of using a scissor lift to get a job done properly.

Ready to purchase a used Genie 3268 RT scissor lift? Take a look at our website or contact our staff today for more information on how you can purchase this scissor lift and have it in your position as quickly as possible. Our representatives are willing to answer any questions you may have. If you aren’t sure the GS3268 RT is the right scissor lift for you, take a look at our other options. We offer a variety of scissor lifts that will likely meet all of your needs.