Used Construction Equipment For Sale near Murrysville, PA

Telehandlers can be a major purchase, even when you’re buying them used. Instead of rushing into a purchase like this, you should gather additional information. Below, you’ll find some of the best questions to ask when purchasing a used telehandler. Ask these kinds of questions, and it will be easier for you to choose the right machine.

What Would You Recommend?

If you’re struggling to choose the right telehandler, you may want to ask for a recommendation. A great vendor should be very familiar with the products they are selling. They should be able to point you in the appropriate direction.

In many cases, a vendor will be able to suggest name-brand machinery. You may want to buy a used JLG telehandler, or a used Manitou telehandler. Asking for suggestions will allow you to identify some of the top options that are available to you. From there, you can look at this equipment and think about what you might like to buy.

How Much Use Has This Machine Seen?

Equipment hours are a big factor when calculating the use of a certain piece of equipment. When you buy a telehandler that has very high hours, like 6,000 hours or more, you’re purchasing something that has already seen quite a bit of use.

You should find out how heavily the telehandler buying has been used. The vendor should be able to tell you a great deal about the history of the equipment. Whether the telehandler has been lightly used or has seen extensive use, you’ll want to know more about how it has been used in the past. Sometimes hours can accumulate when used in frigid temperatures where the machine was left to idle to keep workers warm. Although this is rare, machines with a lot of idle hours are typically in good shape.

Has This Telehandler Had Any Of Its Parts Replaced?

It’s not unusual to replace some of the parts in a piece of construction equipment. Before you buy a piece of machinery, you should determine whether or not it still has all of its main original parts. Things like hoses, hydraulic fittings, wear pads and tires are common with daily use.

Buying a machine that has a replacement part or two isn’t necessarily a bad idea. If the replacement part is brand new, having a new part could actually extend the lifespan of the machine. However, you don’t want these new parts to take you by surprise. Finding out that the machine had fallen off a truck or was heavily damaged on a job site could open your eyes to more issues. You should be completely familiar with what you are buying.

Has This Telehandler Been Inspected?

Has an expert looked over the telehandler you’re considering? If the telehandler hasn’t been inspected, you may want to hold off on buying it. You don’t want to purchase a piece of equipment that could have major problems.

If you buy from National Lift Equipment, you can assume that any machine you buy has been carefully inspected. They have people go over all of the used equipment that they sell. Buying from a vendor like that will allow you to obtain detailed information about used equipment.

Don’t hesitate to ask questions when purchasing used telehandlers. You want to be informed about the purchase you are making. If you seek out additional information, you’ll have a better understanding of what the telehandler you’re looking at has to offer. Learn everything you can about the used equipment that you’re buying.